Pfister 016-300K User Manual download pdf (Page 3)

ENGLISH

8 SLIDE BAR PREPARATION

Remove Posts (8A) from Slide Bar (8B). Remove Decorative Button (8C) from Posts (8A).

9 BOTTOM POST AND BAR INSTALLATION

Orient Bottom Post (9A) so that the Support Socket (9B) faces up. Insert Mounting Screw

(9C) through the hole on Bottom Post (9A) and Back Flange (9D) and tighten until is ﬂ ush

with the wall. Do Not Over Tighten! Insert one end of Bar (9E) into Support Socket (9B).

10 TOP POST AND BAR INSTALLATION

nsert the Top Post (10A) into the other end of the Bar (10B). Insert Mounting Screw (10C)

through the hole on Top Post (10A) and Back Flange (10D) and tighten until is ﬂ ush with

the wall. Do Not Over Tighten!

11 BUTTON INSTALLATION

Insert Decorative Buttons (11A) into Posts (11B). Apply with a small bead of silicone around

outer edge where post meets wall (11C).

12 DROP ELBOW & HOSE INSTALLATION

Apply PTFE plumbers tape on both ends of Pipe Niple (12A) (not included). Screw Pipe

Niple (12A) into the elbow inside the wall. The Pipe Niple (12A) is to project

" from

the ﬁ nished wall. Screw Drop Elbow (12B) onto Pipe Niple (12A) and tighten until Drop

Elbow is properly positioned and ﬂ ush to the ﬁ nished wall.

Connect Hose (12C) into the

Drop Elbow Outlet (12D) by turning Metal Hose Fitting (12E).

10C

11B

12C

10A

10D

10B

11A

11B

11A

12A

12B

12D

12E

”

11C

1 2 3 4 5 6 7 8 ... 11 12

No comments

Pfister 016-300K User Manual Page 3